跳至主要内容

Special in Diamond &CBN tools

搜索此博客

Hot press sintered thin turbo diamond saw blade

十二月 03, 2015

获取链接
Facebook
X
Pinterest
电子邮件
其他应用

Hot press sintered thin turbo diamond saw blade is designed with hot press technology for excellent cutting granite, marble,tile, ceramic.(http://www.newdiamondtools.com/hot-press-sintered-thin-turbo-diamond-saw-blade_p15.html). That thin slot turbo is useful for a clean cut. These holes in the turbo saw blade stays cool when cutting. This kind of diamond saw blade is ideal for cutting various kinds of stone fabrication with fast speed and long life

Feature:

Thin Turbo type

Fast cutting speed and long life

Smooth cutting and high efficiency

Used for angle grinder, circular saw, masonry saw, table saw

Application:

For granite, marble, tiles and ceramic

Dry or wet cutting

获取链接
Facebook
X
Pinterest
电子邮件
其他应用

评论

发表评论

热门博文

Diamond dry polishing pad

Diamond dry polishing pad is designed with resin bond for angle grinder and hand polisher. Dry polishing pad create the same beautiful polish as wet pads.( http://www.newdiamondtools.com/diamond-dry-polishing-pad_p26.html), Diamond dry polishing pad is flexible type and economical, professional quality. Specially use for processing of natural stone in various shapes, also for the maintaining repairing and renewing of decorative stones, it is installed on portable grinding machine and operated by hand, this kind of polishing pad not need water, use it by dry. Features : Resin bond and flexible Grit: 50, 100, 200, 400, 800, 1500, 3000, Buff A perfect polish with long life Provide a scratch-free, highly polished finish on granite, marble and stone Application : For angle grinder, hand held grinder and floor machine Designed to granite, marble, and all kinds of stones Use dry Specification: Item No. Diameter

Problems and Solutions of Diamond Saw Blade 1 The uneven thickness of the slab （1） The basic tension is not appropriate; need to re-correct the diamond saw blade tension （2） Fixed trolley bearing, and loose screw, adjust the rotating screw. （3） Guide rail diameter level difference; the level should be less than 1mm. （4） The screw wheel gap is large, the operation does not exclude the gap; when operating, pay attention to a direction to eliminate the gap. （5） Nut clamping is not tight, and it is shaking and then tighten the clamping nut. （6） Guide the guide wheel is inconsistent; loosen the nut to re-adjust the same. （7） Saw blade side jump is too large; leveling saw blade and test qualified. （8） The segment is not symmetrical with the core; re-weld or replace a new saw blade. （9） Quarry stone for cutting is less than 0.5 m 3 . （10） The transmission chain is too loose,and adjust the chain elastic. 2 Excessive shak

First day in blogger

Hello, everyone. I am one member of Xinxiang New Zuan Diamond Tools Co., Ltd (website:www.newdiamondtools.com)which specialized in manufacturing and supplying diamond tools such as diamond polishing pad, diamond saw blade, diamond core drill bit, diamond grinding wheel and etc. There, I wish I would have many friends and new customers.

由 Blogger 提供支持